* The price shown has been converted from GBP to show
you
the
approximate cost in USD. The exchange rate may change before you
pay.
Description
This anti-skate blade is manufactured from 316L stainless steel and has a matte finish. They’re designed to be inserted into mortar joints between coping, or bricks, and sit within the wall itself. The anti-skate blade is designed as a retrofit solution so it can be installed in any pre-existing wall. They make an ideal skate deterrent as they block off straight lines skaters may look to grind on and keep the furniture, or walls in their original condition.
Material Information
This anti-skate blade is made from high-quality 316L stainless steel to ensure lifelong performance in the toughest of conditions. Due to its composition, 316L stainless steel has far superior weathering resistance when compared to other stainless steel, particularly when subjected to harsh rain, snow, or sleet.
Design
The blade is designed to slightly protrude from the top and side of brickwork and coping, making its presence seamless, blending into the surrounding brickwork while making it clear that the surface is not for skating on. The protrusion is subtle enough that anyone passing by won't get caught on the blade and its rounded edges mean that anyone that comes into contact with it won't come to any harm. The added benefit of the blade being installed in the wall is that it has unmatched strength and is highly resistant to vandalism. The curve of the anti-skate blade matches that of a 12" angle grinder disc so it will sit flush into the cavity created.
Application
These blades can be installed in:
Installation
The anti-skate blades are installed by:
- Cutting into the mortar joints with a 12" angle grinder
- Clearing the cut of dust and debris
- Applying epoxy resin as a fixing agent
- Inserting the blade into the gap
Please note: It can take around 24 hours for the epoxy resin to be completely set.
Installation equipment required: Angle grinder, 12" disc, push pump, epoxy resin, and applicator gun.
This anti-skate blade is manufactured from 316L stainless steel and has a matte finish. They’re designed to be inserted into mortar joints between coping, or bricks, and sit within the wall itself. The anti-skate blade is designed as a retrofit solution so it can be installed in any pre-existing wall. They make an ideal skate deterrent as they block off straight lines skaters may look to grind on and keep the furniture, or walls in their original condition.
Material Information
This anti-skate blade is made from high-quality 316L stainless steel to ensure lifelong performance in the toughest of conditions. Due to its composition, 316L stainless steel has far superior weathering resistance when compared to other stainless steel, particularly when subjected to harsh rain, snow, or sleet.
Design
The blade is designed to slightly protrude from the top and side of brickwork and coping, making its presence seamless, blending into the surrounding brickwork while making it clear that the surface is not for skating on. The protrusion is subtle enough that anyone passing by won't get caught on the blade and its rounded edges mean that anyone that comes into contact with it won't come to any harm. The added benefit of the blade being installed in the wall is that it has unmatched strength and is highly resistant to vandalism. The curve of the anti-skate blade matches that of a 12" angle grinder disc so it will sit flush into the cavity created.
Application
These blades can be installed in:
Installation
The anti-skate blades are installed by:
- Cutting into the mortar joints with a 12" angle grinder
- Clearing the cut of dust and debris
- Applying epoxy resin as a fixing agent
- Inserting the blade into the gap
Please note: It can take around 24 hours for the epoxy resin to be completely set.
Installation equipment required: Angle grinder, 12" disc, push pump, epoxy resin, and applicator gun.
