* The price shown has been converted from GBP to show you
the
approximate cost in USD. The exchange rate may change before you pay.
Description
Please allow for a 2-4 week lead time.
This tactile stud with PVC insert is manufactured from bronze. At 25mm in diameter and 5mm in height, this stud is in line with DETR guidelines, meaning they are suitable for use in guiding the visually impaired in public and private settings.
Material Information
The tactile stud is made from high-quality bronze to add a stylish finish to heritage locations or suitable colour contrast to lighter colour surfaces. The insert is made from a textured PVC that is UV resistant and hardwearing in all conditions.
Design
The tactile stud has a bevelled edge leading up to the textured PVC insert that sits flush inside the stud.
Application
These studs are ideal for use as:
- Stair-nosing alternative
- Area demarcation aids
- Tactile guidance for the blind and visually impaired
Installation
There are two installation methods for these studs:
- Machined Pin - Drill and resin
- Self-adhesive
Please note: If installing using self-adhesive, ensure the surface is cleaned and prepared in advance. When using resin, be aware it may take up to 24 hours for the resin to completely set.
Drilling installation equipment required: Drill, drill bit, push pump, epoxy resin, and applicator gun.
Please allow for a 2-4 week lead time.
This tactile stud with PVC insert is manufactured from bronze. At 25mm in diameter and 5mm in height, this stud is in line with DETR guidelines, meaning they are suitable for use in guiding the visually impaired in public and private settings.
Material Information
The tactile stud is made from high-quality bronze to add a stylish finish to heritage locations or suitable colour contrast to lighter colour surfaces. The insert is made from a textured PVC that is UV resistant and hardwearing in all conditions.
Design
The tactile stud has a bevelled edge leading up to the textured PVC insert that sits flush inside the stud.
Application
These studs are ideal for use as:
- Stair-nosing alternative
- Area demarcation aids
- Tactile guidance for the blind and visually impaired
Installation
There are two installation methods for these studs:
- Machined Pin - Drill and resin
- Self-adhesive
Please note: If installing using self-adhesive, ensure the surface is cleaned and prepared in advance. When using resin, be aware it may take up to 24 hours for the resin to completely set.
Drilling installation equipment required: Drill, drill bit, push pump, epoxy resin, and applicator gun.
