* The price shown has been converted from GBP to show you
the
approximate cost in USD. The exchange rate may change before you pay.
Description
Please allow for a 2-4 week lead time.
This SS cross-hatch pattern stainless steel tactile stud is manufactured from marine-grade 316L stainless steel and is finished with a cross-hatch grooved surface. At 25mm in diameter and 5mm in height, this stud is in line with DfT guidelines, meaning they are suitable for use in guiding the visually impaired in public and private settings.
Material Information
The SS tactile stud is made from high-quality 316L stainless steel to ensure lifelong performance in the toughest of conditions. Due to its composition, 316L stainless steel has far superior weathering resistance when compared to other stainless steel, particularly when subjected to harsh rain, snow, or sleet.
Design
The SS tactile stud features a slight bevelled edge and a cross-hatch surface. The shape of the stud provides ample tactile feedback while enhancing grip levels for pedestrians in harsh conditions.
Application
These studs are ideal for use as:
- Stair-nosing alternative
- Area demarcation aids
- Tactile guidance for the blind and visually impaired
Installation
There are two installation methods for these studs:
- Welded/Machined Pin - Drill and resin
- Self-adhesive
Please note: If installing using self-adhesive, ensure the surface is cleaned and prepared in advance. When using resin, be aware it may take up to 24 hours for the resin to completely set.
Drilling installation equipment required: Drill, drill bit, push pump, epoxy resin, and applicator gun.
Please allow for a 2-4 week lead time.
This SS cross-hatch pattern stainless steel tactile stud is manufactured from marine-grade 316L stainless steel and is finished with a cross-hatch grooved surface. At 25mm in diameter and 5mm in height, this stud is in line with DfT guidelines, meaning they are suitable for use in guiding the visually impaired in public and private settings.
Material Information
The SS tactile stud is made from high-quality 316L stainless steel to ensure lifelong performance in the toughest of conditions. Due to its composition, 316L stainless steel has far superior weathering resistance when compared to other stainless steel, particularly when subjected to harsh rain, snow, or sleet.
Design
The SS tactile stud features a slight bevelled edge and a cross-hatch surface. The shape of the stud provides ample tactile feedback while enhancing grip levels for pedestrians in harsh conditions.
Application
These studs are ideal for use as:
- Stair-nosing alternative
- Area demarcation aids
- Tactile guidance for the blind and visually impaired
Installation
There are two installation methods for these studs:
- Welded/Machined Pin - Drill and resin
- Self-adhesive
Please note: If installing using self-adhesive, ensure the surface is cleaned and prepared in advance. When using resin, be aware it may take up to 24 hours for the resin to completely set.
Drilling installation equipment required: Drill, drill bit, push pump, epoxy resin, and applicator gun.
