* The price shown has been converted from GBP to show
you
the
approximate cost in USD. The exchange rate may change before you
pay.
Description
The 4mm torpedo anti-skate stud is manufactured from 316L stainless steel and has a shiny machine-polished finish. It's designed to sit flush atop walls, planters, or furniture with its 4mm internal radius. Due to its inset fitting placement, the 4mm torpedo anti-skate stud blends in with the wall and appears more like a design choice than a tool to prevent skaters from grinding. They make an ideal skate deterrent as they block off straight-line surfaces that skaters may look to land on and keep the furniture, or walls in their original condition.
Material Information
The torpedo anti-skate stud is made from high-quality 316L stainless steel to ensure a long-lasting performance in the toughest conditions. Due to its composition, 316L stainless steel has far superior weathering resistance when compared to other stainless steel, particularly when subjected to harsh rain, snow, or sleet. The two steel M8 fitting studs create a deep enough anchoring point to give the stud significant impact resistance.
Design
The studs sport a Torpedo-shaped design with a rounded blunt head. The tail of the stud comes to a point lying flat on any surface it's installed on. The length of the stud ensures that a good proportion of the wall or furniture is covered preventing those that would look to skate on it from damaging the surface. There are two equal-length M8 studs for added stability and longevity.
Application
These studs can be installed on:
- Walls
- Benches
- Planters
- Various street furniture
Installation
These studs are installed by:
- Drilling two holes into the designated surface
- Clearing the holes of dust and debris
- Applying epoxy resin as a fixing agent
- Inserting the stud into the holes
Please note: It can take around 24 hours for the epoxy resin to be completely set.
Installation equipment required: Drill, drill bit, push pump, epoxy resin, and applicator gun.
The 4mm torpedo anti-skate stud is manufactured from 316L stainless steel and has a shiny machine-polished finish. It's designed to sit flush atop walls, planters, or furniture with its 4mm internal radius. Due to its inset fitting placement, the 4mm torpedo anti-skate stud blends in with the wall and appears more like a design choice than a tool to prevent skaters from grinding. They make an ideal skate deterrent as they block off straight-line surfaces that skaters may look to land on and keep the furniture, or walls in their original condition.
Material Information
The torpedo anti-skate stud is made from high-quality 316L stainless steel to ensure a long-lasting performance in the toughest conditions. Due to its composition, 316L stainless steel has far superior weathering resistance when compared to other stainless steel, particularly when subjected to harsh rain, snow, or sleet. The two steel M8 fitting studs create a deep enough anchoring point to give the stud significant impact resistance.
Design
The studs sport a Torpedo-shaped design with a rounded blunt head. The tail of the stud comes to a point lying flat on any surface it's installed on. The length of the stud ensures that a good proportion of the wall or furniture is covered preventing those that would look to skate on it from damaging the surface. There are two equal-length M8 studs for added stability and longevity.
Application
These studs can be installed on:
- Walls
- Benches
- Planters
- Various street furniture
Installation
These studs are installed by:
- Drilling two holes into the designated surface
- Clearing the holes of dust and debris
- Applying epoxy resin as a fixing agent
- Inserting the stud into the holes
Please note: It can take around 24 hours for the epoxy resin to be completely set.
Installation equipment required: Drill, drill bit, push pump, epoxy resin, and applicator gun.
