* The price shown has been converted from GBP to show you
the
approximate cost in USD. The exchange rate may change before you pay.
Description
Please allow for a 2-4 week lead time.
This tactile stud is manufactured from TPU (Thermoplastic Polyurethane). At 25mm in diameter and 5mm in height, this stud is in line with DETR guidelines, meaning they are suitable for use in guiding the visually impaired in public and private settings.
Material Information
The tactile stud is made from hardwearing TPU to ensure fantastic performance in indoor environments. The TPU material is rigid and UV resistant to prevent colour fading over time.
Design
The tactile stud has a slightly bevelled edge leading up to a smooth surface.
Application
These studs are ideal for use as:
- Stair-nosing alternative
- Area demarcation aids
- Tactile guidance for the blind and visually impaired
Installation
There are two installation methods for these studs:
- Pin - Drill and resin
- Self-adhesive
Please note: If installing using self-adhesive, ensure the surface is cleaned and prepared in advance. When using resin, be aware it may take up to 24 hours for the resin to completely set.
Drilling installation equipment required: Drill, drill bit, push pump, epoxy resin, and applicator gun.
Please allow for a 2-4 week lead time.
This tactile stud is manufactured from TPU (Thermoplastic Polyurethane). At 25mm in diameter and 5mm in height, this stud is in line with DETR guidelines, meaning they are suitable for use in guiding the visually impaired in public and private settings.
Material Information
The tactile stud is made from hardwearing TPU to ensure fantastic performance in indoor environments. The TPU material is rigid and UV resistant to prevent colour fading over time.
Design
The tactile stud has a slightly bevelled edge leading up to a smooth surface.
Application
These studs are ideal for use as:
- Stair-nosing alternative
- Area demarcation aids
- Tactile guidance for the blind and visually impaired
Installation
There are two installation methods for these studs:
- Pin - Drill and resin
- Self-adhesive
Please note: If installing using self-adhesive, ensure the surface is cleaned and prepared in advance. When using resin, be aware it may take up to 24 hours for the resin to completely set.
Drilling installation equipment required: Drill, drill bit, push pump, epoxy resin, and applicator gun.
